08 FARECOR PLASTER

Añadir título

This is a text area

Button

CHARACTERISTICS
Cementitious adhesive.
For stoneware and tiles.
Tiled on plaster.
Maximum adherence on plaster.

APPLICATIONS:
Glue mortar for laying tiles and stoneware in medium / high porosity (> 6%).
For indoors.

SUPPORTS:
Conventional plaster plasters.
Anhydrite support.
With bonding bridge: consult.

COMPOSITION:
White cement, siliceous and /or calcareous aggregates and organic and inorganic additives.

PREPARATION OF THE MIXTURE:
Water dosage: 24% ± 2% (± 6 liters bag).
Knead until you get a homogeneous paste and let it rest for 3 to 5 minutes.
Yield approx. simple gluing 4-5 Kg / m²

PRODUCT APPLICATION:
Spread the product in small cloths (maximum 2m²) with an 8x8 mm trowel to regularize the application thickness.
Laying the tiles and pressing until a good settlement and distribution of the product is achieved.

RECOMMENDATIONS:
Respect the mixing water.
Avoid laying in weak casts.
Avoid placing on wet supports.
The tiles must not be larger than 900cm².
It is mandatory to leave joints between tiles of at least 3 mm.
The application temperature should be between 5 ° C and 30 °.
Protect from wind currents.

For more information request technical data sheet and or safety.

Share by: