09 FARECOR PORCELANICO

Añadir título

This is a text area

Button

CHARACTERISTICS
Cement-based adhesive.
For indoor and outdoor.
Porcelain stoneware.
High adhesion.
More creamy.

APPLICATIONS:
Cement-based adhesive  for placement of ceramic tiles , especially porcelain stoneware.
For indoor and outdoor.
For floors and walls.

SUPPORTS:
Cement-based floors.
Walls: plastered with sand and cement.
With bonding bridge: smooth concrete.
Consult other supports.

COMPOSITION:
Gray/white cement, siliceous and/or calcareous aggregates, resins and organic and inorganic additives.

PREPARATION OF THE MIXTURE:
Water dosage: 26% ± 2% (± 6.5 liters bag).
Knead until you get a homogeneous paste and let it rest for 3 to 5 minutes.
Yield approx. simple gluing 4-5 Kg / m²

PRODUCT APPLICATION:
Spread the product in small cloths (maximum 2m²) with an 8x8 mm trowel to regularize the application thickness.
Laying the tiles and pressing until a good settlement and distribution of the product is achieved.
It is mandatory to leave joints between tiles of at least 3 mm.

RECOMMENDATIONS:
Respect the mixing water.
The tiles must not be larger than 900cm².
With large formats use double gluing.
The application temperature should be between 5 ° C and 30 °.
Protect from wind currents.

For more information request technical data sheet and or safety.

Share by: