11 FARECOR FLEX

Añadir título

This is a text area

Button

CHARACTERISTICS
Cementitious adhesive.
Deformable.
Radiant floors.
For large formats..
Suitable in immersion.

APPLICATIONS:
Deformable adhesive mortar (S1) for laying ceramic tiles, especially porcelain stoneware.
Indoors and outdoors.
Floors and walls.

SUPPORTS:
Cement-based floors.
Old floors (depending on conditions).
Walls: plastered with sand and cement.
Plasterboard walls.
With bonding bridge: consult.

COMPOSITION:
Gray / white cement, siliceous and / or calcareous aggregates, resins and organic and inorganic additives.

PREPARATION OF THE MIXTURE:
Water dosage: 26% ± 2% (± 6.5 liters bag).
Knead until you get a homogeneous paste and let it rest for 3 to 5 minutes.
Yield approx. simple gluing 4-5 Kg / m²

PRODUCT APPLICATION:
Spread the product in small cloths (maximum 2m²) with an 8x8 mm trowel to regularize the application thickness.
Laying the tiles and pressing until a good settlement and distribution of the product is achieved.
It is mandatory to leave joints between tiles of at least 3mm.
In cladding with large format pieces (> 60x40cm) or with a cladding height greater than 3mm, safety clamps (GR) or mechanical anchors must be used in addition.

RECOMMENDATIONS:
Respect the mixing water.
For formats greater than 900cm² apply double gluing.
The application temperature should be between 5 ° C and 30 °.
Protect from wind currents.

For more information request technical data sheet and or safety.

Share by: