12 FARECOR FLEX TOTAL

Añadir título

This is a text area

Button

CHARACTERISTICS
Cementitious adhesive.
Very deformable.
Radiant floors.
For large formats.
Suitable in immersion.

APPLICATIONS:
High performance and highly deformable cementitious adhesive for laying all types of ceramic tiles of any size, thickness and / or absorption, indoors, outdoors and facades.

SUPPORTS:
Cement-based floors, self-leveling mortars.
Pre-existing pavements of terrazzo, stone, ceramic, etc.
Walls: plastered with sand and cement, brick factories, blocks, etc.
Plaster, plasterboard, aerated concrete.
Existing ceramic coatings.
Other supports, consult.

COMPOSITION:
Gray / white cement, siliceous and / or calcareous aggregates, resins and organic and inorganic additives.

PREPARATION OF THE MIXTURE:
Water dosage: 30% ± 2% (± 7.5 liters bag).
Knead until you get a homogeneous paste and let it rest for 3 to 5 minutes.
Yield approx. simple gluing 4-5 Kg / m².

PRODUCT APPLICATION:
Spread the product in the traditional way using a trowel and double gluing for large formats.
Laying the tiles and pressing until a good settlement and distribution of the product is achieved.
Eliminate the excess material in the ceramic joints to achieve a better bond.

RECOMMENDATIONS:
Respect the mixing water.
It is mandatory to leave joints between tiles of at least 2 mm in interior and 5 mm in outdoor.
The application temperature should be between 5 ° C and 30 °.
Protect from wind currents.

For more information request technical data sheet and or safety.

Share by: