14 FARECOR GEL FLEX

Añadir título

This is a text area

Button

CHARACTERISTICS
Fluid and thixotropic.
Special for low thickness and large dimension formats.
Unbeatable adherence.
High wetting capacity.
Up to 20mm thick.
Up to 20% more performance than a conventional adhesive.

APPLICATIONS:
High performance cementitious adhesive gel for laying all kinds of ceramic tiles with any size and / or absorption, indoors and outdoors.
Up to 20mm thick.

SUPPORTS:
Cement-based floors, self-leveling mortars.
Pre-existing pavements of terrazzo, stone, ceramic, etc.
Walls: plastered with sand and cement, brick factories, blocks, etc.
Plaster, plasterboard, aerated concrete.
Existing ceramic coatings.
Other supports, consult.

COMPOSITION:
Gray / white cement, siliceous and / or calcareous aggregates, special resins and latest generation organic and inorganic additives.

PREPARATION OF THE MIXTURE:
Dosage of water: 6.5-7.5 liters bag.
Knead until you get a smooth and smooth paste.
Let stand 3 to 5 minutes and knead.
Yield approx. simple gluing 3-4 Kg / m²

PRODUCT APPLICATION:
Spread the product in the traditional way using a trowel and double gluing for large formats.
Laying the tiles and pressing until a good settlement and distribution of the product is achieved.
Eliminate the excess material in the ceramic joints to achieve a better bond.

RECOMMENDATIONS:
Respect the mixing water.
It is advisable to leave joints between tiles of at least 2mm indoors and 5mm outdoors.
The application temperature should be between 5 ° C and 30 °.
Protect from wind currents.

For more information request technical data sheet and or safety.

Share by: