17 FARECOR ELITE

CHARACTERISTICS
Flexible and waterproof.
Porcelain and pools.
Antibacterial, anti-mold and anti-algae.
Fast setting and hardening.
Hydroexpan technology.

APPLICATIONS:
High performance colored mortar for joints from 1 to 15 mm.
Ideal for grouting in swimming pools, bathrooms, wet rooms, porcelain floors in kitchens, dining rooms, terraces and facades.

SUPPORTS:
The joints to be filled must be completely clean and free of dust, as well as being at least 3mm deep.
The adhesive must be fully hard for at least 48 hours from its placement.
Not admissible: painted supports, waterproofed supports and, in short, any support that does not present good absorption and acceptable consistency.

COMPOSITION:
White cement, mineral fillers.
Resins, waterproofing agents, organic and inorganic additives.

PREPARATION OF THE MIXTURE:
Water dosage: 21% ± 2% (from 1 to 1.2 liters for 5kg bag).
Knead until you get a homogeneous paste and let it rest for 3 to 5 minutes, then knead.

PRODUCT APPLICATION:
Spread the product with a rubber trowel, squeezing tightly into small cloths, then clean the excess material with the same trowel.
When the mortar is partially hardened, 25 to 60 minutes and the shine has disappeared, a first cleaning will be carried out with a damp sponge. For the final cleaning, wait for the total hardening of the mortar (8 to 12 hours), cleaning the surface with a damp cloth.

RECOMMENDATIONS:
Do not clean with excess water or with the material still fresh, this would cause color variations as well as a poor finish.
Do not apply in rain, strong wind or direct insolation or with a hot or waterlogged substrate.

For more information request technical data sheet and or safety.

Share by: