26 RAFECOR RASPADO ELITE

CHARACTERISTICS
Monolayer.
Waterproof.
Very light.
Different finishes.
High durability.

APPLICATIONS:
Continuous coating for decoration of facades.
With several finishes very impervious to rainwater.
Permeable to water vapor.

SUPPORTS:
Plastering mortar, brick factory, concrete blocks.
With bonding bridge: smooth concrete.
Consult other supports.
Not admissible: plaster or plaster supports, painted supports, waterproofed supports and, in short, any support that does not present a good absorption and acceptable consistency.

COMPOSITION:
White cement, siliceous and / or calcareous aggregates, resins and waterproofing additives.

PREPARACIÓN DE LA MEZCLA:
Dosificación de agua: 25%±2% (±6,5 litros saco).
Amasar hasta conseguir una pasta homogénea y dejar reposar entre 3 y 5 minutos.
Rendimiento aprox. por 1mm de espesor 1,5 Kg/m²

PREPARATION OF THE MIXTURE:
Spread the product with a trowel or projecting machine leaving a thickness of about 15 mm and smooth with an aluminum ruler or similar.
Application thickness between 15 and 20mm. Leaving in any case and once finished a minimum thickness of 10mm.

FINISHING THE PRODUCT:
SCRATCHING: when the mortar begins to harden, scrape with a metal scraper, respecting the point of hardening and the direction of the scraping throughout the cloth to avoid changes in tone and / or finish.
Once dry, it must be brushed to remove dust from the surface.
STONE EFFECT: once it begins to harden after scraping, smooth the surface with a trowel.
Respect the instructions for use.

For more information request technical data sheet and or safety.

Share by: