27 FARECOR STONE

CHARACTERISTICS
Monolayer.
Waterproof.
Very light.
Projected dry finish.
High durability.

APPLICATIONS:
Continuous coating for decoration of facades.
Projected dry finish.
Impervious to rain water.
Permeable to water vapor.

SUPPORTS:
Plaster mortar, brick factory, concrete blocks.
With bonding bridge: smooth concrete.
Consult other supports.
Not admissible: plaster or plaster supports, painted supports, waterproofed supports and, in short, any support that does not present good absorption and acceptable consistency.

COMPOSITION:
White cement, siliceous and / or calcareous aggregates, resins and waterproofing additives.

PREPARATION OF THE MIXTURE:
Water dosage: 28% ± 2% (± 7 liters / sack).
Knead until you get a homogeneous paste and let it rest for 3 to 5 minutes.
Yield approx. for 1mm thick 1.4 Kg / m²

PRODUCT APPLICATION:
Spread the product with a trowel or projecting machine leaving a thickness of about 10 / 12mm and smooth with an aluminum ruler or similar.
The time to project the aggregate is 20 to 60 minutes, and can be lengthened or shortened depending on environmental conditions.
Application thickness between 10 and 15mm. Leaving in any case and once finished a minimum thickness of 10mm.

RECOMMENDATIONS:
Do not apply in rain, strong wind or humidity.
Correct the points at risk of cracking before application.
The projectable aggregate can cause variation of final tonality, not being attributable to Farecor.
Respect the instructions for use.

For more information request technical data sheet and or safety.

Share by: