30 FARECOR PREMIX

CHARACTERISTICS
Colored concrete.
On-site manufacture of formwork.
High resistance.
Wide range of colors.

APPLICATIONS:
Two-component colored concrete.
Designed for on-site fabrication of formwork such as swimming pool edges, shower trays, sidewalks, etc.

SUPPORTS:
The support must be clean and absorbent in addition to having good resistance.
Highly absorbent and / or hot surfaces must be moistened when using the product.
Not admissible: plaster or plaster supports, painted supports, waterproofed supports and, in short, any support that does not present a good absorption and acceptable consistency.

COMPOSITION:
Gray / white cement, aggregates and additives.

PREPARATION OF THE MIXTURE:
Mix one part of Farecor Premix with one part of Farecor Arido colored of 3/6mm.
Water dosage: 16% ± 2% (± 4 liters / sack).
Knead until you get homogeneous concrete.
Yield approx. 1,200 Kg + 600 Kg of aggregate x m3 to fill.

PRODUCT APPLICATION:
According to the traditional formwork system.
Application thickness: up to 15 cm.

RECOMMENDATIONS:
Do not apply in rain, strong wind or direct sunlight.
Respect the instructions for use.

For more information request technical data sheet and or safety.

Share by: