31 MULTIPURPOSE FARECOR

CHARACTERISTICS
Multi-application product
suitable for:
- Wall factory.
- Plastered.
- Paving.

APPLICATIONS:
Multi-application dry mortar.
Suitable for paving, plastering, plastering and partitioning of precast concrete bricks and blocks.
Indoor and outdoor.

SUPPORTS:
The support must be clean and absorbent in addition to having good resistance.
With adhesion bridge: smooth concrete.
Consult other supports.
Not admissible: plaster or plaster supports, painted supports, waterproofed supports and, in short, any support that does not present a good absorption and acceptable consistency.

COMPOSITION:
Gray / white cement, aggregates and / or calcareous and additives.

PREPARATION OF THE MIXTURE:
Water dosage: 19% ± 2% (± 4.75 liters / sack).
Knead until you have a homogeneous paste and let it rest for 3 to 5 minutes.
Coating performance approx. x 1mm thick 1.7 Kg / m².
Performance as a wall factory with blocks +/- 14 Kg / m².

APPLICATION OF THE PRODUCT AS A PLASTER:
Spread the product with a trowel and thin it leaving a maximum thickness of 8mm.
Once partially hardened, float.
For a finer finish after trowelling, trowel again and / or brush the surface.
Application thickness not exceeding 8 mm.

RECOMMENDATIONS:
Do not apply in rain, strong wind or direct sunlight.
Respect the instructions for use.

For more information request technical data sheet and or safety.

Share by: