34 FARECOR IMPERMEABLE FINO

CHARACTERISTICS
Waterproofing by mineralization.
Resists pressure and back pressure.
Watertight.
Reversible.

APPLICATIONS:
Waterproof coating mortar.
Suitable for waterproofing: tanks, basements, parking, rafts, tunnels, elevator shafts, etc.
It is used on walls, floors and ceilings, both indoors and outdoors and supports 5mm thicknesses.

SUPPORTS:
The support must be clean and also have good resistance.
Not admissible: plaster or plaster supports, painted supports and, in short, any support that does not present an acceptable consistency.

COMPOSITION:
Special cements, selected aggregates and inorganic and organic additives.

PREPARATION OF THE MIXTURE:
Knead until you get a homogeneous paste and let it rest for 3 to 5 minutes.
Yield approx. x 1mm thick 1.6 Kg / m².

PRODUCT APPLICATION:
Brush or lay down a thinner first coat to saturate the substrate.
Let it dry for about 4 hours, moisten the first layer and apply a second one.
Layer crossed to the previous one. Wet the waterproofed surface 24 hours later.

RECOMMENDATIONS:
Do not apply in rain, strong wind or direct sunlight.
Respect the instructions for use.

For more information request technical data sheet and or safety.

Share by: