36 FARECOR IMPERMEABLE FLEXIBLE
-
![]()
Añadir título
ButtonThis is a text area
CHARACTERISTICS
Flexible, single-component, modified polymer mortar (PCC) for protection and waterproofing of surfaces concrete.
Reversible.
Reversible.
APPLICATIONS:
Waterproof coating mortar.
Waterproofing of terraces and balconies and outdoor surfaces exposed to significant thermal changes such as cantilevers for terraces and roofs, cornices, etc.
Waterproofing of concrete tanks for drinking water.
Waterproofing of bathrooms, showers, swimming pools, etc., prior to laying ceramic tiles.
Waterproofing of cracked walls or walls that may be subjected to small movements.
Waterproofing of buried constructions such as basements, foundations, etc.
To ensure waterproofing, the final thickness must be 2mm at any point.
Waterproofing of terraces and balconies and outdoor surfaces exposed to significant thermal changes such as cantilevers for terraces and roofs, cornices, etc.
Waterproofing of concrete tanks for drinking water.
Waterproofing of bathrooms, showers, swimming pools, etc., prior to laying ceramic tiles.
Waterproofing of cracked walls or walls that may be subjected to small movements.
Waterproofing of buried constructions such as basements, foundations, etc.
To ensure waterproofing, the final thickness must be 2mm at any point.
SUPPORTS:
The support must be clean and also have good resistance.
Not admissible: plaster or plaster supports, painted supports and ultimately any support that does not present an acceptable consistency.
Not admissible: plaster or plaster supports, painted supports and ultimately any support that does not present an acceptable consistency.
COMPOSITION:
Special cements, selected aggregates and inorganic and organic additives.
PREPARATION OF THE MIXTURE
Knead until you get a homogeneous paste and let it rest for 3 to 5 minutes.
Yield approx. x 1mm thick 1.4 Kg / m².
Yield approx. x 1mm thick 1.4 Kg / m².
PRODUCT APPLICATION:
Apply a first coat using a brush or trowel leaving a maximum thickness of 2mm.
After 4 hours apply a second cross coat to the first.
A minimum of two coats must be applied, guaranteeing a minimum consumption of 3 Kg / m².
After 4 hours apply a second cross coat to the first.
A minimum of two coats must be applied, guaranteeing a minimum consumption of 3 Kg / m².
RECOMMENDATIONS:
Do not apply in rain, strong wind or direct sunlight.
Respect the instructions for use.
Respect the instructions for use.
For more information request technical and safety data sheet.
Location
Call us:
34 957 509 314
659 200 852
How to get:
Crrtra..ESTEPA GUADIX KM 42.5, 14900 Lucena (Córdoba), Spain
Office hours
- Mon - Fri
- - -
- Sat - Sun
- Closed
