41 FARECOR TAPA VIAS

CHARACTERISTICS
Hardening and ultrafast.
Direct on the leak water.
Manual application.

APPLICATIONS:
Clogging of leak water with pressure or back pressure due to fissures, cracks or holes in interior and exterior.

SUPPORTS:
Cement-based walls, sand and cement plasters, solid brick factories, solid concrete block, etc.

COMPOSITION:
Hydraulic binders, silicon aggregates and specific additives.

PREPARATION OF THE MIXTURE:
Prepare the amount of product necessary to plug the leak water.
With protected hands we will knead the product using 0.3 liters of water per Kg.
Performance approx. x 1.6 kg per liter to fill.

PRODUCT APPLICATION:
As soon as it begins to harden (about 30/40 seconds), form a ball and press directly onto the line, maintaining pressure for a few minutes, once it is effective to smooth with a trowel or trowel.

RECOMMENDATIONS:
Do not use as a concrete repairman.
Do not fill large surfaces.
For large surfaces apply from the outside to the inside.
Respect the instructions for use.

For more information request technical data sheet and or safety.
Share by: